Storage, use and maintenance of PET protective film

1, tape should be stored in the warehouse, to avoid the sun and rain; prohibited contact with acid base oil, organic solvents, keep clean and dry, from the discovery device 1m, room temperature between -15 and ~40 degrees.

2, tape should be placed in rolls, do not fold, storage time is too long, should be changed every season. Anti static warning floor adhesive tape PET protective film

3, loading and unloading conveyor belt, the best use of cranes, and with a beam of the rigging, lifting smoothly, to avoid damage to the belt side, do not rough handling, causing loose roll rejection.

4, tape type, specifications should be based on the needs of use and specific conditions, reasonable selection.

5, shall not be different varieties, different specifications, models, strength, cloth layers of adhesive tape connected (with groups) used together.

6, the conveyor belt joint is best to use hot vulcanization adhesive, in order to improve reliability, to maintain a higher effective strength.

7. The diameter of the transmission roller of the conveyor and the minimum belt diameter of the conveyor belt shall comply with the relevant provisions.

8, do not allow the tape or crawl to keep hunting, drag roller, roller flexibility, tension force should be moderate.

9, conveyor equipped with baffles and loading device, should avoid the tape wear.

10, cleanliness is the basic condition for the good operation of adhesive tape. Foreign material will affect the eccentricity of belt, tension difference and even fracture.

11, the use of adhesive tape found early damage phenomenon, should promptly find the cause, repair, to avoid the emergence of adverse consequences.